Tandy 3977-01 Instructions For Use Download Page 2

Page: 2 / 4

T A N D Y P R O ® M A N U A L S T R A P C U T T E R

MACHINE SET UP

The TandyPro

Manual Strap Cutter is set up for use straight

from the box.

OPTIONAL:

For additional machine stability, remove the rubber

feet from the bottom of the machine and secure the machine to

your work surface with screws.

3. Turn the crank counterclockwise to cut the material

into straps.

2. Insert the material under the shield until it is touching at least

one blade.

1. Loosen the knob on the material guide and move it to the

desired location.

CUTTING

Summary of Contents for 3977-01

Page 1: ...parts can crush and cut Choking Hazard small parts Not for children under 3 years Keep hands clear during operation This product is not intended for use by children adult supervision required Read and...

Page 2: ...al machine stability remove the rubber feet from the bottom of the machine and secure the machine to your work surface with screws 3 Turn the crank counterclockwise to cut the material into straps 2 I...

Page 3: ...rom the blades 3 Remove the three bolts holding the end plate in place 2 Turn the knobs under the material plate to lower the poly roller away from the blades 4 Remove the end plate CHANGING BLADES 6...

Page 4: ...reached 7 Twist the material guides until they are clear of the blades 9 Reassemble in the reverse order making sure to raise the poly roller until the blades dig into the cutting surface slightly WA...