Step 1A:
Loosen the Easy
Install locking nut from
the riser to base-faucet
connection.
Step 1B:
Remove the riser
from the base faucet by
pulling up on it.
Step 2A:
Using a 3/8”
Allen wrench, remove the
bushing and locking nut
from riser. (Either keep as
spare parts or discard.)
Step 2B:
Clean Loctite
residue from riser threads
with soap and water.
Your riser is now almost
ready to be connected to
the add-on faucet.
Step 3A:
Apply plumber’s
tape or putty to base
threads of riser.
Step 3B:
Thread bottom
of riser into top female
section of Add-on Faucet.
Tighten.
Step 4A:
The Add-on
Faucet & upper pre-rinse
assembly are ready to be
reconnected to the base
faucet.
Step 4B:
Press the
bushing down into faucet
body and tighten locking
nut.
B-0155-LNEZ
1A
1B
2A
2B
3A
3B
4A
4B
How to Install a T&S
Easy Install Add-on
Faucet on an Easy Install
PRU.
B-0155-LNEZ
T&S Brass and Bronze Works, Inc.
2 Saddleback Cove, P.O. Box 1088
Travelers Rest, SC 29690
TEL: (800) 476-4103
FAX: (800) 868-0084
