manualshive.com logo in svg

Tandem ENFORM 058057, Reference Manual, Page: 230 / 312

Share
Download
Tandem ENFORM 058057 Reference Manual Download Page 230

!!! Error and *** Warning Type Messages

Error Messages

058057 Tandem Computers Incorporated

B–3

***

Message table must contain both ?MESSAGES and ?HELP sections

Self-explanatory.  Use the BUILDMK utility to build the key-sequenced message
table file.

***

Message table version number is not correct

The version number in the message table does not match the version number expected
by ENFORM.  Rebuild the key-sequenced message table file using the appropriate
version of BUILDMK.

***

Primary key for message table file must be offset at 0 and

have length 34

Self-explanatory.  Use the BUILDMK utility to build the key-sequenced message
table file.

***

Sorry, you're not allowed to run ENFORM on this processor

This processor does not have the required ENFORM microcode.

!!! Error and *** Warning Type Messages

!!! ERROR [26]

Invalid use of range item

A subscript range may only be used as a target-item (but cannot be used when
modified by a BY, BY DESC, ASCD, or DESC clause) in a LIST or FIND statement.  Its
use is invalid in all other circumstances.

!!! ERROR [27]

Unknown ENFORM directive or syntactically incorrect

A command name has been misspelled or attempt to execute a command from a
different subsystem.

Summary of Contents for ENFORM 058057

























































































































































































































































































































Reviews:

No comments