Getting Ready
22
Installing the USB Driver
Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the supplied
software first.
If the Base Unit is not an RTR-500W, please follow directions for installing the USB
Device Drivers found in the Introductory Manual that came with the Base Unit you are
using.
1.
Open the “RTR-500W for Windows” from the Start Screen or Start
Menu.
2.
Open the RTR-500W Settings Utility.
3.
Connect the Unit with the supplied USB cable to your computer.
The USB driver installation will start automatically.
- Do not connect a Unit to your computer until the software has been installed.
- It is not necessary to connect the AC adaptor at this point.
4.
After the USB driver installation is completed, the factory default
settings will be displayed automatically in the settings window.
