T&D RTR-500, Introductory Manual

Page: 25 / 36

23 Other
Registering Devices and Making Settings
This section briefly explains in sequence what needs to be
done in order to carry out registration of devices and the
making of settings.
1. Base Unit Settings
Before making initial settings please confirm the following:
Is the Unit connected to a PC with the USB cable?
Are the LED lamps on the Unit both lighted up?
Is the PC clock showing the correct date and time?
Open the "RTR-500 Settings Utility" from the Applications Menu, and
make settings for the Base Unit.
2. Remote Unit Registration
1. After having completed the Base Unit Settings, in the RTR-500
Settings Utility, open the [Remote Unit Settings] Menu.
2. When the direction appears in the application window connect
the Data Logger to enable communication with the Base Unit
and/or PC.
-
Only carry out Remote Registration on one Unit at a time; do not connect
multiple Units at the same time.
RTR-501 / 502 / 503 / 505 / 507
(Optical Communication)
Place a Data Logger (Remote Unit)
face down on the Base Unit
connected to your PC so that the
optical communication areas meet.
USB Connection
Optical Communication
Areas
RTR-574 / 576
(USB Communication)
With a USB cable, connect the Data
Logger (Remote Unit) to your PC.
USB Connection