TCWS.54NG04.C 180208-12
2.
Connect spark electrode wire (ORANGE)
to the rear electrical bulk head fi tting. Connect
the fl ame sensor wire to the front electrical
bulk head fi tting. (Fig. #2)
3. Tilt burner tray length-wise and insert
into the fi rebox. (Fig. #3)
4.
While supporting one end of the burner
tray, connect gas line to the tee on the un-
derside of the burner tray. (Fig. #4)
CAUTION:
Ensure that all connections are gas
tight.
5. Attach pilot to burner tray. (Fig. #5)
ORANGE WIRE
Fig #2
Fig #3
Fig #4
Fig #5
3
