Operating the Equipment Locally — Setup Menu: Video Menu
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 4-29
ST.RE.E10137.3
Screen Saver Option
This option enables the Screen Saver to be set.
Table 4.12: Screen Saver Options
Selected Option
Description
Top Level Menu
Van
Service Name
Off
If no changes have been made to the Encoder for five
minutes (no softkey has been pressed) the chosen
screen saver appears on the front panel display.
Keypress Beep Option
This option enables the Keypress Beep to be set.
Table 4.13: Keypress Beep Options
Selected Option
Description
On
A beep sounds every time that a key is pressed.
Off
There is silence every time that a key is pressed.
Power Dip Recovery Option
This option enables the Power Dip Recovery to be set. It determines the
state of the satellite modulator outputs (if fitted).
Table 4.14: Power Dip Recovery Options
Selected Option
Description
On
The outputs are restored following a power dip.
Off
The outputs are not restored following a power dip.
Upgrade Encoder Option
There are a number of features which are not enabled by default. Refer to
Chapter 3, Options and Upgrades, Table 3.1 for details.
This shows the serial number of the box, which is in the range of 0 to
65535. Send this number to TANDBERG Customer Services and they will
return a software licence key to enter via the front panel to enable the
features.
NOTE…
These software options must be purchased before the software licence key is sent.
Software Release Option
The software release cannot be changed.
Fan Control Option
Refer to Annex B, Technical Specification for more information about the
temperatures at which fans activate and deactivate.
