Operating the Equipment Locally – Main Menu Option 1: Quick Setup Menu
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators
Page 3-17
ST.RE.E10152.2
Quick Setup Menu Option 13: IF Output
This is used for switching the IF output On or Off.
IF Output : Current Value= "ON"
1 OFF
2 ON
Quick Setup Menu Option 14: Mod. State
This is used for switching the modulation state On or Off. The modulation
Off state is sometimes known as ‘CW’ or ‘Clean Carrier.’
Mod. State : Current Value= "ON"
1 OFF
2 ON
Quick Setup Menu Option 15: IF Spectrum
When IF Spectrum is set to Normal, the modulation at the IF Output of
the Modulator is in accordance with ETSI standards EN 300 421 (DVB-S)
and/or EN 301 210 (DVB-DSNG), as appropriate. When set to Inverted,
the modulation spectrum is inverted (reversed). This is useful when there
is a spectrum inversion introduced by the following up-converter.
IF Spectrum : Current Value= "Normal"
1 Normal
2 Inverted
Quick Setup Menu Option 16: UpConv Freq
UpConv Freq represents the overall translation frequency of the external
up-converter. See also Quick Setup Menu Option 10: IF Frequency and
Quick Setup Menu Option 11: Uplink Freq.
UpConvFreq : Current Value= "12.800000" GHz
Enter New Value 0.000000 to 100.000000 in GHz,
or press Enter
