9
Using Tape Recorder and Turntable
Recording radio
When a tape recorder is connected to your Huldra 8, it will always be ready to record from the
radio. All you have to do is to start recording. Since the signal is tapped off before the main
amplifier, the recording is independent of the volume control, tone controls and speaker selector
setting. You may therefore turn the volume all the way down and still record the radio program.
Tape Playback
Press the “Bånd” button.
Sound reproduction is in stereo by default. If you prefer monaural
playback,
press the “Mono” button. Each amplifier channel can still be controlled individually. The
tone controls will work identically on both channels.
Play Records
Ensure the pick-up selector at the rear is correctly set according to your pick-up type. Press the
“Gram” button.
Optionally, p
ress the “Mono” button for monaural playback.
Recording from Turntable
Press the “Gram” button and start recording on the tape
deck. The recording can be heard in the
speakers. You may listen to the radio while recording from the turntable to the tape deck by
pressing the button for the preferred wave band and the “Gram” button simultaneously.
Set the
speaker selector in position
“App. 1/Sep. 2”
Stereo indicator
The stereo indicator lights up when tape or records are played in stereo mode, or during FM
stereo reception, if a FM stereo decoder is fitted (optional).