Web Browser Interface — Mux Menu
Reference Guide: EN8000 MPEG-4 Part 10 (H.264/AVC) Encoders
Page 5-53
ST.RE.E10233.1
5.10 Mux
Menu
Access the
Mux
Menu
from the
Configure Menu
. This menu permits the selection of
Multiplexer output parameters.
Path: / Configure / Mux
Figure 5.23: Configure> Mux Webpage
Table 5.21: Mux Options
Selected Item
Options
Description
188 bytes
Uses 188 byte packet format.
Packet Length:
This option enables the Packet
Length to be set.
204 bytes
Uses 204 byte packet format.
On
Multiplexer output is switched on.
On-Air:
This option determines whether the
output of the Encoder is sent to the
Multiplexer.
Off
Multiplexer output is switched off.
Min 0.0000 Mbit/s
Max 65.0000 Mbit/s
Step Size
0.0001 Mbit/s
Multiplexer output bitrate when in baseband output format and ASI output
mode.
The maximum bitrate is 65 Mbit/s irrespective of packet size. To obtain 69
Mbit/s modulated output rate, set the packet size to 188 and bitrate to
65 Mbit/s. The modulator automatically adds 16 Reed-Solomon bytes per
packet.
Bitrate (188) and Bitrate (204):
If the specified bitrate is outside the
valid input range, a confirmation
screen is displayed which shows
the maximum/minimum value
allowed.
NOTE…
If the Packet Length option is set to 188 bytes then only the Bitrate (188) option is
displayed. If the Packet Length option is set to 204 bytes then both the Bitrate (188)
and Bitrate (204) options are displayed.
