Options and Upgrades
Reference Guide: evolution 5000 E5780 and E5782 Encoder
Page 3-25
ST.RE.E10135.4
This port is available on the S8063 physical layer option
module. It provides a bi-directional interface to an SDH or
SONET B-ISDN network, at a fixed line transmission rate of
155.520 Mbit/s. This is a full duplex device.
Table 3.28: Multi-mode Fibre Optic Connector
Item Specification
Connector type
SC type
Connector designation
SDH STM-1/OC3 (MULTI-MODE)
Wavelength
1300 nm Multi-mode (MMF)
NOTE…
The module is supplied with a protective sealing cap, which protects the optical components from
ingress of dust and foreign bodies. The protective sealing cap should be fitted during transit and
whenever the interface is not in use.
3.9
STM-1 OC3 Monomode Physical Interface Module
(M2/EOM2/ATMS155SM)
3.9.1 Assembly
See
for the slots that it can be installed in.
For details of the DVB-ASI Copper Input, DVB-ASI Copper Output and Ethernet Connector
refer to
Section 3.7.3, Common Connectors
Figure 3.6: ATM Network Interface Module, Monomode Optical (M2/EOM2/ATMS155SM)
Receive
Transmit
Encoder
Video In
HD SDI
Audio In
ATM Network Interface
Module Monomode Optical
SDH STM-1/OC3 (MONOMODE)
IN
OUT
DVB ASI–C
IN
OUT
ETHERNET
Output to SDH or SONET B-ISDN Network
ASI-C Output
SDI IN
HD SDI IN
AUDIO IN
ASI OUT 1
ASI OUT 2
ASI OUT 3
Output Transport Stream
The Host Encoder
Output Transport Stream
outputs are still
Output Transport Stream
available.
Input from SDH or SONET B-ISDN
Network
ASI-C Input
Local Control
