TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 30 / 314

Installing the Equipment
Page 2-6 Reference Guide: E57xx DSNG and DENG Voyager Encoder
ST.RE.E10076.3
The unit is designed for stationary or fixed use only. Ensure it is firmly and
safely located and has an adequate through-flow of air. Allow at least
50 mm free air-space at each side of the equipment. Units in racks can be
stacked without ventilation panels between. Racks containing stacked
equipment may need to be forced-air cooled to reduce the operating
ambient temperature. For stacking constraints contact Customer Services.
The 1U Encoder uses a similar air-flow path, with three fans on each side
of the unit. With both 1U and 2U units it is important not to block the front
air intake on the bottom-left corner of the front panel (see Figure 2.2).
Figure 2.2: Air Path Through the 2U Enclosure
NOTE…
Cooling arrangements in current models may differ to those shown.
2
Warm air out
(right, front)
4
Warm air out
(left, rear)
1
Cool air in
(front – via bottom vent)
Do not block the air intake.
Two fans mounted
at front, right side
of unit
3
Cool air in
(right, rear)
Three fans mounted
at rear, left side of
unit