2
Product Contents
Figure 1: Items shipped with CSR820
Your CSR820 is shipped with the following
items:
2
Rack mounting brackets
2
Plug-in connector blocks (9-pin)
1
US Power cable
1
Installation and Operation Guide
Installing the CSR820
The CSR820 may be installed into a standard
ANSI/EIA RS310-C 19” (48mm) rack (one rack
unit height). Installation includes attaching signal
connections and powering-up the unit.
Figure 2: Rack Mounting
1. Locate the two mounting brackets in the
installation kit.
2. Use the existing mounting screws on the
CSR820 to install the mounting brackets
onto the sides of the IRD.
3. Place the unit in the rack. Mount the
CSR820 to the rack using four screws (not
supplied).
4. If the mounting brackets are attached
properly, they will support the weight of the
CSR820. Leave one RU space above and
below each unit for reliable operation.
