D14646.01—MARCH 2010
13
TANDBERG Codec C40
The Physical Interface Guide
Contents
Introduction
The physical interface
Appendices
Contact us
www.tandberg.com
Audio outputs
Line Out 1–2 (RCA)
2 x RCA sockets, audio output 1–2
Can be configured as two stereo pairs.
Main connector.
Line Out 1 (left) and Line
Out 2 (right) are the main connectors to the local
loudspeaker system.
The local loudspeaker system may or may not include
the TANDBERG DNAM (Digital Natural Audio Module).
Default configuration Line Out 1–2.
In default
configuration, Line Out 1 and 2 are configured as
stereo speakers.
if a DNAM is present or SPDIF* is active on Line Out 1,
then Line Out 1 provides a digital stereo speaker signal
and Line Out 2 is not active.
RCA pin–out
External view of socket
RCA—Phono Plug (the Radio Corporation of
America)
What is a Line output
A Line output consists of all signals from
the local side and all signals from the far
end side.
What is a Speaker output
A Speaker output consists of all signals
from the local side, except microphones,
and all signals from the far end side.
Left channel
The Left channel consists of all the Left
channel and Mono signals.
Right channel
The Right channel consists of all the Right
channel and Mono signals.
2 x Line Out
GND
Signal
*SPDIF—Sony/Philips Digital Interface, used by the Digital Natural Audio
Module.
Contents
Introduction
The physical interface
Appendices
Contact us
The physical interface
Contents
Introduction
The physical interface
Appendices
Contact us
The physical interface
