40
TANDBERG Videoconferencing System
General use
DC in
1
. Single
2
. Single
Video out
Audio out
3
. Dual
3
. Doc
4
. VCR
VGA out
1
Mic
1
2
Mic
2
3
1
2
3
4
VCR
1
2
ISDN BRI
Ethernet
I
O
PC Presenter
Plugging a PC into the system is made extremely simple through the PC Presenter, avoiding the need for any
additional hardware such as a projector, PC/Video converter or extra cables.
• Connect a VGA-VGA cable from your PC (VGA Output) to ‘VGA In’ on your system.
• Start your PC.
• Press
P
C
on your remote control.
• Press
S
ELFVIEW
until the indicator ‘Selfview‘ is displayed on your main monitor (single monitor system) or until
you see the PC image on the second monitor.
If no PC image is displayed on your monitor, make sure that your PC transmits the image to the VGA Output, and
that the PC transmits a supported VGA-format (see tip below). Consult your PC-operating manual to see how to
transmit a VGA image from your PC (typically: Fn+F5).
PC Presenter input
(VGA In)
VGA Output
PC SoftPresenter *
PC SoftPresenter is used to display PC images on your system. The system and your PC must be connected to
a LAN. In addition, VNC (Virtual Network Computing) server software must be installed on the PC.
To show the PC image:
• Start the VNC software on your PC.
• Press
P
C
on your remote control. Use UP/DOWN to activate PAGE UP/PAGE DOWN on the PC.
For setup information and details, see ‘VNC Settings’ in ‘Advanced use’.
‘
PC: VNC
’
MUST
BE
SET
IN
‘
V
IDEO
S
ETTINGS
’.
NOTE
VGA-
FORMATS
SUPPORTED
(VESA
COMPLIANT
)
·640X480
60,72,75,85 H
Z
·800X600
56,60,72,75,85 H
Z
·1024X768
60,70,75 H
Z
* - Optional feature.
