Tandberg Data SUPERLOADER, Quick Start Manual

Page: 7 / 14

Loosely install the four screws that
connect the support brackets (two
screws per support bracket) to the
autoloader brackets.
e
Verify that the autoloader is level.
Adjust as needed.
Tighten the four screws that attach the
two front ears to the front rails.
Tighten the four screws that connect
the two support brackets to the two
autoloader brackets.
Tighten the four screws that connect
the two support brackets to the two
rear rails.
f
g
h
i
Autoloader bracket
Support bracket
13
Rackmount the
autoloader,
continued
2. Slide the autoloader in place so that
the front ears of the autoloader align
with the front clip nuts. Then loosely
install the four screws that connect the
two support brackets to the two front
rails.
Front rail
Front ear
12