13
OF
28
4.
Completing the installation
—
a.
Locate the tape drive cover plate (see
“Reference Illustrations” on page 3
). First,
remove the necessary SCSI plates (
S
), then attach the tape drive cover plate (
P
) with
the screws you removed earlier.
b.
Reconfigure your library—
You must reconfigure your library for your backup
application to recognize the new tape drive
. See
page 25
for instructions.
!
Important
The library requires both the SCSI cover plates (
S
) and the tape
drive cover plates (
P
) for ESD protection. Do not leave any
openings uncovered.
Do not connect the SCSI cables until after you reconfigure the
library.
Library
If your library has...
Attach this SCSI cover plate (S)...
Tape drive
configuration
Quantity
Location
External drive label
StorageLibrary
T24
Half height
two
None
NA
one
Top
NA
Full height
one
None
NA
Magnum448
Half height
Four
None
None
Three
Top
Drive 4
Two
Top and third
Drive 4 and 3
One
Top three
Drive 4, 3, and 2
Full height
Two
None
None
One
Top
Drive 2
a
a
This applies to both SCSI and Fibre Channel library configurations.
