Tandberg Data SDLT220, Product Manual

Page: 4 / 142

SDLT 220 and SDLT 320 Product Manual
User Manual Statements for Class A Equipment (Internal Tape
System)
This equipment generates, uses, and may emit radio frequency energy. The equipment has been
tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against radio frequency
interference in a commercial installation.
Operation of this equipment in a residential area may cause interference, in which case the user at
his own expense will be required to take whatever measures may be required to correct the
interference.
Any modifications to this device—unless expressly approved by the manufacturer—can void the
user’s authority to operate this equipment under Part 15 of the FCC rules.
Note: Additional information on the need to interconnect the device with shielded (data) cables or
the need for special devices, such as ferrite beads on cables, is required if such means of
interference suppression was used in the qualification test for the device. This information will vary
from device to device and needs to be obtained from the EMC (Electromagnetic Compatibility)
group or product manager.
Warning!
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Achtung!
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses
Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende
Gegenmaßnahmen verantwortlich ist.
Warning!
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Attention!
Ceci est un produit de Classe A. Dans un environnement domestique, ce produit risque de créer des
interférences radioélectriques, il appartiendra alors à l'utilisateur de prendre les mesures spécifiques
appropriées.