20
R
EFERENCE
M
ANUAL
1021806
3 I
NSTALLATION
I
NFORMATION
Figure 1:
Dock Mounting Details
IMPORTANT: As system-mounting and grounding are outside our control, Tandberg
Data cannot be held responsible for any problems due to systems not meeting the
relevant testing standards.
Rear Connectors
The SATA Power Connector and SATA Host Interface are located at the rear end
of the Dock and the layout shown in the figure below.
Figure 2:
Rear View of SATA III Dock and Features
Power Dissipation
The maximum allowed internal temperature in the Dock in operating mode is
limited by the media. The ambient temperature should be kept between 10°C and
40°C, humidity between 20% and 80%, and maximum Wet Bulb temperature is set
SATA Power Connection
SATA Host Connection