Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
30
Installing a Rack Mount Library
Figure 26 Securing the
Library to the Rack
7
Insert a #2 POZIDRIV screwdriver into one of the holes and turn the rack
mount clamp screw clockwise to tighten it fully.
As you tighten this screw, a lever protrudes from the side of the library
and presses against the back side of the rack rail.
8
Tighten the remaining rack mount clamp screw in the same manner.
9
Press the button next to the right magazine access door.
The right magazine access door opens.
10
through
to secure the right side of the library to the rack.
11
Close the magazine access doors.
Caution:
Do not overtighten the rack mount clamp screw. When the
screw begins to feel tight, turn it an additional quarter turn
and then stop.
Magazine
access doors
Access holes
for the rack
mount clamp
screws