Tandberg Data MSERIES USER, User Manual, Page: 96 / 190

Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
80 Tandberg Data M-Series User’s Guide
8
When the flashing arrow is next to the desired source element, press
Select
.
The GUI displays the
Move Cartridge TO
screen (see figure 51 ). A
flashing arrow indicates the currently selected destination element.
Figure 51 Move
Cartridge TO Screen
9
Press the
Level
button to select the level where the desired
destination element is located.
10
Press the
Up
and
Down
buttons to select the destination element for
the cartridge.
11
When the flashing arrow is next to the desired destination element,
press
Select
.
The GUI displays the
Confirm Move Cartridge
screen (see figure 52 ).
Tandberg Data