Tandberg Data MSERIES FC USER, User Manual, Page: 7 / 26

Tandberg Data FC420 Bridge Option User’s Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002
Setting SCSI IDs 7
Figure 4 shows a six-drive library utilizing a two-drive per port
cabling scheme.
Figure 4 Two-Drives-Per-
FC420-Port Cabling
Setting SCSI IDs
0
Use the information in table 1 to set the SCSI device addressing (SCSI
IDs) for the library.
Table 1 SCSI ID Settings
Note:
To increase the bandwidth available to each tape drive,
install additional FC420 Fibre bridges and use the cabling
configuration shown in figure 3 .
Device SCSI ID Device SCSI ID
SCSI Controller 0 Drive 3 4
Drive 0 1 Drive 4 5
Drive 1 2 Drive 5 6
Drive 2 3
Drive 2 Drive 1
Drive 4 Drive 3
Drive 6 Drive 5
Slot for FC420
FC420
FC420
SCSI controller
SCSI
SCSI
SCSI
SCSI
2-GB SAN
Fibre
Primary
electronics
module
Auxiliary
electronics
module
M2500
SCSI
SCSI
Fibre
SCSI
Terminator