Tanco A100 EH Quick Reference Manual Download Page 1

Page: 1 / 4

TRACTOR CONNECTION

1. Hydraulics

Red pipe

> Supply (25-35lpm)

Blue pipe

> Return (

Free flow return!!)

2. Electrics

A. Connect 12V supply to 3pin plug

B. Connect wrapper harness to controller

ENTERING THE WORKING POSITION

1. Remove the transport pin from the load arm.

2. Adjust the load arm width to suit the correct

bale size.

3. Adjust the position of the dispenser to

ensure that the film will be applied to the

centre of the bale.

4. Add the film roll into the dispenser, ensuring

that it is threaded correctly, and attach the

film to the Cut & Start.

The quick reference guide is not a substitute for the Operators Manual!

Please refer to Operators Manual for more detailed information

A100 EH QUICK REFERENCE GUIDE

Summary of Contents for A100 EH

Page 1: ...Adjust the load arm width to suit the correct bale size 3 Adjust the position of the dispenser to ensure that the film will be applied to the centre of the bale 4 Add the film roll into the dispenser...

Page 2: ...Auto wrap Auto offload a Auto mode A Auto offload 1 Drive into the bale 2 Press and release the Load arm up button on the controller a to load the bale 3 Press Auto start on the controller b to begin...

Page 3: ...t pin should also be used when the machine is being parked Model Bale Diameter 4 layres 6 layres 8 layres A100 EH 120 cm 16 wraps 24 wraps 32 wraps A100 EH 150 cm 20 wraps 30 wraps 40 wraps SETTING NO...

Page 4: ...l mode L2 Cut and Grip Film L3 Slow Wrap L4 Reverse Table L5 Load Arm down Power On Off Emergency Stop R1 Table tip up in Manual mode Autotip in Automatic mode R2 Release Film Grip R3 Fast Wrap Resume...