17
20/03/2015
Tanco Autowrap 404
Operators manual
a. Loading
Loadarm rais
and return back
on sensor
Table is hold in
loadposition
b. Wrapping
Start:
Starts up on 1/2
speed and runs
further in 1/1 speed
Wrapping
Wrap with adjusted
speed unntil setted
nbr of revolutions.
Stop.
Table goes to stop
from 1/1 to 1/2
speed an stops on
sensor.
c. Unloading
Table starts raising
Table stops and the
cutter is closing
Table goes further
to the top and return
to sensor frame.
Table turns into
loading position
Loadposition
Loadarm down
Unload position
Loadarm down
Table down
Table in loadposition
4. Wrappingcycle
Aktivited sensors
Loadarm down
