18
Tanco Autowrap 1300 S
Operator’s manual
7.3.0 Using the Instrument
7.3.1 Channel 1 - Current/Target Wraps Display
Press to select .
The left-hand section shows the current number of wraps and the right hand section shows the target number.
When the current number = Target number, the alarm will sound for 2 seconds and the display will flash. (If set, the
early warning alarm sounds beforehand).
Automatic reset of current number to zero normally occurs 5 seconds after the Target number is reached. If
additional wraps are added after the Target number is reached, the current number will continue to advance.
7.3.1.1 Manually reset No. of Wraps to Zero
Press to select .
Press and hold.
7.3.1.2 Programme the Target Wraps
Hold continuously.
The third digit flashes
.
Hold to cycle to the required digit then release, otherwise press once…
The fourth digit flashes.
Hold to cycle to the required digit.
Release all.
