26
Tanco Autowrap 1300 EH
Operator’s manual
11.0 PERIODIC MAINTENANCE.
11.1
BEARINGS.
All ball-bearings are packed with grease, and do not need any more maintenance.
11.2
PRE-STRETCHER.
If the machine is in daily use, the Gears under the plastic cover on the dispenser should be greased
when needed.
11.3
CUTTER / FILM HOLDER.
The cutter / film holder is pre-adjusted from the factory and does not need further adjustments.
When replacing spare parts, it is necessary to adjust it. The springs for the U-shaped slot shall be
adjusted so that they are almost completely squeezed together when the cutter-arm is all down.
11.4
CLEANING.
The machine should be cleaned and oiled regularly and at the end of the wrapping season.
NOTE !
When using high pressure washing apparatus, care must be taken with the electrical
installation.
Also make sure that water is not sprayed directly into the bearings, etc..
Keep the control box protected from rain and water. If necessary use compressed air to
dry electrical components.
11.5
HYDRAULIC CYLINDERS.
Make sure that all hydraulic cylinders are closed when storing the machine.
11.6
QUICK COUPLERS.
Ensure that the quick couplers are kept clean and apply the dust caps after use.
11.7
STORAGE.
The machine should be parked on a dry place during the closed season.
11.8
OIL FILTER.
The oil filter must be changed once a year.