TANBead M8-H, User Manual, Page: 22 / 40

20
Well:

User can choose a well to set the specific action.

When it is connected with the M8-H Autostage, the M8-H can process maximum
12 columns of wells.
Mode:
Performable actions.

C: Collecting

M: Mixing

V: Vaporing

P: Pause
RPM:
The speed of spin

Input value from 500 to 3000 rpm

It recommended to set the spinning speed at least 3000 rpm for the efficient
mixing.
Time (second):
Operation time of each action

3599 is the maximum value
CW/CCW (second):
Frequency of rotation change.

Input value from 0-990.

Number “20” means the spin direction will change every 20 seconds.

Equivalent to the stir field in the M8-H edit page.
Temperature (Celsius):
Temperature in centigrade

Range: From 20 to 70 degrees.

Increase/decrease in increments of 5 degrees.
Temperature Control:

Press Yes: Input the value in the temperature field and tick in the enable box.

Press No: Temperature control is not activated.
NOTE: If this field remains empty, the control function is invalid.