Van ’t Hoffstraat 12
2665 JL Bleiswijk, The Netherlands
T. 31 (0) 10 522 43 73
E-mail: [email protected]
Website: www.tamson.com
Tamson Instruments bv
Page 10/20
tc16-40-58-man.docx Rev. 2.4 UK 9-21
ISO 9001 : 2015
NL/PRO 238239125
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
6.6
Fluid Level
Do not operate the bath with low fluid level.
When the fluid level is too low, bath fluid will vaporize
leading to toxic and flammable fumes.
Flammable fumes can lead to fire
Flammable fumes can be ignited by the not submersed
part of the heating element.
The level indicator(optional) will start to blink (white light)
when the fluid level is too low.
When the bath has been installed it must be filled
with an appropriate liquid. When working with water
the bath should be filled to 1 cm below the lid. For oil
the bath should be filled to not more than 5 cm below
the lid. Depending on the operating temperature the
liquid level in the bath should be observed and
excessive fluid should be removed.
The liquid level should be maintained between 1 and 3
cm below the lid during normal operation.
The heating element will be damaged when not fully
submerged in the bath fluid. A lower level than 5 cm
below the lid may damage the heaters. A high bath level
can cause overflow and might also damage the bath
insulation.
Low fluid level
-
Can cause fire when heater gets partially
exposed
-
Will damage the heater
6.7
Fluid Level Detect
Level detection is available as an option. When the fluid
level becomes too low an audible alarm is triggered.