English
Page 24
Choosing a power supply
The module is designed for connection to a model railway power
source, i.e. 12-18 Volt direct (d.c.) or alternating (a.c.) voltage.
Technical specifications
Supply voltage
12-18 Volt a.c. or d.c. voltage
Current consumption
(without connected loads)
ca. 15 mA
Max. current loading
250 mA
Protected to
IP 00
Ambient temperature in use
0 - + 60° C
Ambient temperature in storage
-10 - + 80° C
Comparative humidity allowed
max. 85 %
Dimensions
ca. 73 x 80 mm
Weight
ca. 66 g
Required tools and consumables
Make sure you have the following tools, equipment and materials ready
for use:
§
a heat-resistant mat
§
a soldering iron stand with tip-cleaning sponge
§
a small side cutter and wire stripper
§
a pair of tweezers and long nose pliers (not necessary for the
ready-built module)
§
an electronic soldering iron (max. 30 Watt) with a fine tip
§
tin solder (0,5 mm. diameter)
§
wire (diameter: > 0,22 mm² for all connections)
§
two lamps for the functional test
