Installing the HP-IB Interface
Refer to the Owner’s Guide of your computer for instructions on opening
your computer and installing PCI boards.
Follow the instructions being careful to handle the TAMS interface board
only by its edges. After the board has been plugged in and the retaining
screw installed the computer should be reassembled.
Depending on the computer, is may be advisable to connect the small
Cannon connector of the required HP-IB cable to the TAMS interface card
prior to fully seating the PCI board. Reassemble the computer. Ensure
that the thumbscrews and the small connector are tight for a good
connection.
HP-IB cable required with TAMS interface.