18
The Rotary Switch indicates what position the switch associated with this channel is set
to on the PCI card. This field can only be changed by physically changing the Rotary
Switch Setting on the PCI card. Only change the Rotary Switch setting when the
computer is turned off and power is disconnected. The two switches on a 65488 card
must be set to unique numbers, and must not conflict with switch settings on other 61488/
64488/65448 cards in the system.
The System Controller checkbox indicates if this interface is the GPIB System Controller.
Typically, this checkbox is checked.
Additional information on these functions is provided through the HELP button.
When you are finished setting the configurable parameters, click OK. You will then see
your interface listed on the screen.
Now, repeat this procedure to configure the other channel if using a 65488 GPIB interface,
and click OK to exit IO Config.
