Before You Continue
You are now ready to install the software that came with the HP-IB card.
You will need to be logged in as a user with administrative privileges in
order to install the driver software.
Note:
Before installation of the drivers for the TAMS HP-IB card,
the
HP/Agilent I/O Libraries software must be already installed on your
system.
Installing the Software on Windows NT 4.0
After booting and logging in to Windows NT 4.0, insert the TAMS 60488
Drivers CD. If the SICL libraries were installed in a directory other than
the one chosen by default, make sure that you know their location, as you
may need this information when you run the Setup utility.
Run the setup.exe utility from the drivers CD that is found in the directory
that corresponds to Windows NT 4.0. This can be done by double-clicking
on the setup.exe file on the CD, or by accessing the add/remove programs
utility from the Control Panel.
Follow the directions in this utility, making sure that the location of the
SICL libraries is correct. Reboot your system when directed to do so. The
card will not be ready for use until it has been configured.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
