background image

English

WIB-5

Page 14

How to use this manual

If you have no specialist technical training, this manual gives step-by-
step instructions for safe and correct fitting of the module, and
operation. Before you start, we advise you to read the whole manual,
particularly the chapter on safety instructions and the FAQ chapter. You
will then know where to take care and how to prevent mistakes which

take a lot of effort to correct.
Keep this manual safely so that you can solve problems in the future. If you pass

the module on to another person, please pass on the manual with it.

Intended use

The module can be used according to the specifications in this manual
as interior lighting for a model vehicle (e.g. bus compatible to the
Faller* Car-System, model railway carriage).
The module is not suitable for children under the age of 14. Reading,
understanding and following the instructions in this manual are
mandatory for the user. Any other use is inappropriate and invalidates
any guarantees.

Safety instructions

Mechanical hazards

Cut wires can have sharp ends and can cause serious injuries. Watch

out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use

damaged parts: recycle and replace them with new ones.

Electrical hazards

§

 

Touching powered, live components,

§

 

touching conducting components which are live due to malfunction,

§

 

short circuits,

§

 

connecting the circuit to another voltage than specified,

Summary of Contents for 22-01-076


















Reviews: