tams
elektronik
English
WIB-33.2
Table of contents
1. Getting started............................................................................3
2. Safety instructions.......................................................................4
3. Safe and correct soldering...........................................................5
4. Operation overview.....................................................................6
5. Technical specifications...............................................................9
6. Mounting the carriage lighting....................................................10
6.1. Overall view......................................................................10
6.2. Connection to the power supply.........................................11
6.3. Connecting bridging capacitors...........................................11
6.4. Connecting a light depending resistor.................................11
6.5. Connecting LEDs to the output AUX2..................................12
6.6. Connecting auxiliary devices to the outputs AUX1 and AUX3 12
6.7. Connecting PCB section 2...................................................12
6.8. Setting the LEDs´ brightness..............................................13
6.9. Fixing the carriage lighting.................................................13
7. Programming the function decoder.............................................13
8. Configuration variables and registers..........................................14
9. Presets.....................................................................................19
10. Check list for troubleshooting.....................................................20
11. Guarantee bond........................................................................21
12. EU declaration of conformity.....................................................21
13. Declarations conforming to the WEEE directive...........................21
© 11/2016 Tams Elektronik GmbH
All rights reserved. No part of this publication may be reproduced or
transmitted in any form or by any means, electronic or mechanical,
including photocopying, without prior permission in writing from Tams
Elektronik GmbH.
Subject to technical modification.
Remark:
RailCom
®
is the registered trademark of the Lenz Elektronik
GmbH, Hüttenbergstraße 29, D-35398 Gießen. To increase the text´s
readability we have refrained from refering to this point in each
instance.
The asterisks **
This manual mentions the following companies:
Gebr. MÄRKLIN** & Cie. GmbH | Postfach 8 60 | D-73008 Göppingen
Page 2