English
LD-G-8
Page 34
Technical specifications
Data format
DCC
Supply voltage
12-24 Volt digital voltage
Current consumption
(without connected loads)
approx. 10 mA
Max. current for motor
1.000 mA
Max. current per function output
500 mA
Max. total current
1.500 mA
Protected to
IP 00
Ambient temperature in use
0 - + 60° C
Ambient temperature in storage
-10 - + 80° C
Comparative humidity allowed
max. 85 %
Dimensions
approx. 27,5 x 16,5 x 5,5 mm
Weight
approx. 5 g
Checking the package contents
Check the contents of the package for completeness immediately after
unpacking:
§
one decoder, with or without soldered connecting wires resp.
soldered NEM 652 interface connector, depending on the version.
§
one manual.
N.B. For technical reasons it is possible that the PCB is not completely
inserted. This is not a fault.
Required tools and materials
Make sure you have the following tools, equipment and materials ready
for use:
§
an electronic soldering iron (max. 30 Watt) with a fine tip,
§
a soldering iron stand,