KSM-4
t
a
ms elektronik
3.2. Connections
There are terminal strips soldered to the module which are used to insert and screw on the
connecting cables.
1 | 2
Rails outside the terminal loop.
Pay attention to assigning both rail connections exactly as shown in the figure!
3 | 4
Transition zones, outer rail in both cases.
5 | 6
Inner section of the loop:
5 → outer rail | 6 → inner rail
7 | 8
Push-button 1
9 | 10
Push-button 2
Coil driven points:
Motor-run points:
W 1
Position of points 1
Connection 1
W 2
Voltage supply / Return conductor
not in use
W 3
Position of points 2
Connection 2
10 | Connections KSM-4
Summary of Contents for KSM-4
Page 18: ...KSM 4 tams elektronik 18...
Page 19: ...tams elektronik KSM 4 19...
