tams elektronik FCS-3 Manual Download Page 16

English

FCS-3

Seite 32

Conditions of warranty

This product is guaranteed for two years. The warranty includes the
correction of faults which can be proved to be due to material failure or
factory flaw. We guarantee the function of the parts according to the
parameters in not mounted state as well as the adherence to the
technical specifications of the circuit when assembled and connected
according to the manual.
Other claims are excluded. By law, we are not responsible for damages
or secondary damages in connection with this product. We retain the
right to repair, make improvements, supply spare parts or return the
purchase price.
The following invalidate the warranty:

§

 

using an unsuitable soldering iron, solder containing liquid acids or
similar,

§

 

if damage is caused by not following the instructions in this manual
or the connection diagram(s)

§

 

if the module has been altered and repair attempts have failed,

§

 

if arbitrary changes in the circuit are made,

§

 

if additional components are added which are not described in the
manual,

§

 

if the copper tracks or soldering eyes are damaged,

§

 

if damage occurs due to an overload of the module,

§

 

if connected to a incorrect voltage or current,

§

 

if damaged by other persons,

§

 

if damaged by faulty operation or if damaged by careless use or
abuse,

§

 

if damaged by touching components before electrostatic
discharging of the hands.

* "

Faller

" is a registered and protected trade mark of Gebrueder Faller

GmbH, Guetenbach, Germany.

Summary of Contents for FCS-3




















Reviews: