tams
elektronik
!
English
BiDi-Power
Connection to the BiDiBus
In order to connect the module BiDi-Power to the BiDiBus you use
Ethernet patch cables with RJ-45 connectors.
Connect the two Ethernet-cables according to the connection diagram
to the RJ 45 connection sockets
Interface
Power
Observe the correct assignment of the cables to the two sockets.
Attention:
An interchanged connection of the
two Ethernet-cables to the sockets
"Interface" and "Power" possibly
causes serious damage to BiDi-
Power and other current suppliers
connected to the bus line. In case
you discover a wrong connection,
disconnect the power supply for
the
module
BiDi-Power
immediately
!
Seite 10