RCD-1
English
Page 37
RCD-1
Connection to
JP1
Programming connector
X1.1
Rails / rail 1 (inside, right)
X1.2
Rails / rail 2 (outside, left)
X2.1
Booster connection rail 1 (outside, left)
X2.2
Booster connection rail 2 (inside, right)
X3.1
Display device connection B
X3.2
Display device connection A
LED-display of the RCD-1
The LED on the RCD-1 shows, if the device receives signals and which
type they are.
LED
Received signals
on
DCC-signal received and RailCom-Cutout detected.
out
No DCC-signal received. When using a multiple protocol
control unit you have to drive at least one decoder on the
layout in DCC format.
flashes
DCC-signal received, but no RailCom-Cutout detected.
The RailCom-Cutout is supplied by the booster and is
indispensible for feeding back data with RailCom. That is
the reason why the booster supplying the respective rail
section has to be RailCom-compatable.