ENGLISH
Disposal of Electrical and Electronic Equipment in Private Households.
Disposal of used Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and
electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or
the collection system of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed
information about recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the product.
Thank you for purchasing the Tamron lens as the latest addition to your photographic equipment.
Before using your new lens, please read the contents of this Owner’s Manual thoroughly to
familiarize yourself with your lens and the proper techniques for creating the highest quality
images possible. With proper handling and care, your Tamron lens will give you many years of
photographing beautiful and exciting pictures.
Explains precautions that help to prevent problems.
Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig.
, if not specified)
①
Lens hood
②
Hood attaching alignment mark
③
Hood locking mark
④
Filter ring
⑤
Hood release mark
⑥
Focus ring
⑦
Distance scale
⑧
Distance mark
⑨
Zooming ring
⑩
Focal length scale
⑪
Zoom lock switch
⑫
VC (Vibration Compensation) switch
⑬
AF/MF switch
⑭
Focal length mark
⑮
Lens attachment mark
⑯
Lens-camera interface contacts
MAIN SPECIFICATIONS
B008TS
Focal Length
18-270 mm
Maximum Aperture
F/3.5-6.3
Angle of View
75˚33' - 5˚55'
Lens Construction
13/16
Minimum Focus Distance
0.49 m (19.3")
Maximum Magnification Ratio
1:3.8 (at 270 mm)
Filter Size
ø 62 mm
Length
88 mm (3.5")*
Diameter
ø 74.4 mm (2.9")
Weight (with tripod mount)
450 g (15.9 oz)*
Lens Hood
DA18
* Values are specifications of Nikon products.
Length: Distance from lens front to mount surface.
Features and appearances of lenses listed in this owner's manual are subject to change without
notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark
⑮
and mounting mark on the
camera, and then insert the lens.
Turn the lens counterclockwise for Nikon models or clockwise for Canon models until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button
on the camera.
Turn off the power of the camera before attaching or removing the lens.
In the case of Canon cameras, align with the EF lens mark (red circle).
For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE (Ref. Figs.
-
)
To shoot using autofocus (AF), set the AF/MF switch
⑬
to “AF”.
To shoot using manual focus (MF), set the AF/MF switch
⑬
to “MF”, and then use your hand to
turn the focus ring
⑥
and focus the image.
The distance scale
⑦
is provided as a guideline. It may differ from the actual focus location.
In AF mode, it may be difficult for autofocus to work depending on the subject.
Through the full-time manual mechanism, when focusing with AF, it is possible to switch to MF by turning
the focus ring
⑥
while the AF/MF switch
⑬
is set to AF. AF can be resumed by releasing your finger from
the shutter button and then repressing the shutter button halfway.
To ensure focus under various conditions, the focus ring
⑥
rotates past the infinity (∞) position.
Accordingly, always check the focus in the viewfinder when shooting with manual focus, even when the
focus is aligned with infinity.
For details, please read the instruction manual of your camera.
VC MECHANISM (Ref. Figs.
,
)
The VC (Vibration Compensation) mechanism reduces image blur caused by hand-held shooting.
How to use VC
When you use VC, set the VC switch
⑫
to ON.
Press the shutter button halfway and confirm that the viewfinder image is stable before taking
a picture.
VC is effective under the following conditions
Dimly lit locations
Locations where flash photography is prohibited
Locations where the footing is unstable
VC may not perform sufficiently under the following conditions
When a photograph is taken from a vehicle that is shaking greatly
Shooting during excessive movement of the camera
When shooting while using a tripod
Set the VC switch
⑫
to OFF when taking pictures with bulb photography (long exposures).
Otherwise, VC may cause a malfunction.
The viewfinder image may become blurred immediately after the shutter button is pressed
halfway. This is due to the principles of VC and not a malfunction.
When the VC switch is set to ON, the number of recordable images is reduced due to the power
used from the camera.
Set the VC switch to OFF when you are shooting while the camera is secured by something other
than your hand (such as a tripod).
Do not remove the lens from the camera while VC is on. If the lens is removed while VC is on, the
lens may make a clicking sound if the lens is shaken. This is not a malfunction. If the lens is
installed on the camera, and the camera’s power is switched on, the sound stops.
For Nikon cameras equipped with a built-in flash, VC will be turned off while the built-in flash is
charging.
ZOOMING (Ref. Figs.
,
)
While looking through the camera’s viewfinder, rotate the zooming ring
⑨
of the lens to set the
focal length suitable for the image, and then shoot.
ZOOM LOCK MECHANISM (Ref. Figs.
,
,
)
You can lock the zoom ring
⑨
at a focal length of 18mm to keep it from rotating.
Setting the zoom lock (Ref. Fig.
)
Align 18mm on the focal length scale
⑩
with the focal length mark
⑭
.
Slide the zoom lock switch
⑪
downward.
Releasing the zoom lock (Ref. Fig.
)
Slide the zoom lock switch
⑪
upward.
To zoom, release the lock, and then rotate the zooming ring.
LENS HOOD (Ref. Figs.
,
-
)
A bayonet-type lens hood is provided as standard equipment.
We recommend shooting with the hood properly attached because the lens hood eliminates stray
light that may affect the picture.
Installation for use (Ref. Figs.
,
)
Align the hood attaching alignment mark
②
of the hood with the hood release mark
⑤
of the
lens.
Rotate the hood in the direction of the arrow until the hood locking mark
③
meets the hood
release mark
⑤
.
Installation for storage (Ref. Fig.
)
You can stow the lens hood by attaching it in reverse.
Align the hood locking mark
③
of the hood with the hood release mark
⑤
of the lens.
Rotate the hood in the direction of the arrow until the hood attaching alignment mark
②
meets
the hood release mark
⑤
.
Be aware that the perimeter of the photographed image may be darkened if the hood is not
attached properly.
PRECAUTIONS WHEN SHOOTING
Make sure to perform zooming operation before focusing. It may be out of focus, if you perform
zooming operation after focusing.
An internal focusing (IF) system is employed to achieve the minimum focus distance. Because of
this, the shooting range is wider than that of lenses using other focusing systems when shooting
at a distance less than infinity.
Always remove the hood when you use the built-in flash on the camera for flash photography.
Otherwise, the hood or lens may darken the perimeter of the image. With close-up photography,
the lens itself blocks the flash, and dark semicircle may appear at the bottom of the screen, even
when the lens hood is not used. For flash photography, we recommend that you use an external
flash unit provided by the camera manufacturer.
Differences in the display systems of cameras may result in the display of values different from
the maximum and minimum aperture values in the specifications. This is not an indication of an
error.
Use with mirrorless interchangeable-lens cameras is not guaranteed.
TO ENSURE LONG-TERM SATISFACTION
Remove dust and soiling on the lens by using a blower or soft brush. Do not touch the lens with
your fingers.
When fingerprints or oil have adhered to the lens, lightly wipe with commercially available lens
cleaning paper, soak a well-washed cotton cloth, or microfiber cloth (cleaning cloth for glasses,
etc.) in lens cleaner, and then lightly wipe the lens surface starting from the center. Do not use a
silicone cloth.
Clean the lens barrel using a silicone cloth. Never use benzene, thinner, or other organic
solvents.
The front element has been coated to prevent water and oily substances from adhering. This
coating will repel liquids such as lens cleaners. To clean the lens, we recommend at the end to
wipe it with a dry cloth.
Mildew is a major problem for lenses. Store your lens in a clean, cool, and dry place. When you
store the lens in a lens case, store it with a commercially available drying agent and replace the
drying agent occasionally.
Do not touch the lens-camera interface contacts. If dust or stains cause contact problems,
signals are not transmitted properly between the lens and camera, and malfunctions may occur.
If the temperature changes suddenly, moisture may form within the camera and lens and cause
malfunctions.
To prevent this, seal your equipment in a plastic bag or similar container. After your equipment
has adjusted to the ambient temperature, remove it from the bag and use it as usual.
