Set temperature to desired
heat level and press the
heat button
At this time, the machine will take a few minutes to heat up
At
80 degrees Celsius
, you will hear a beep from the
machine. This is to let you know that when the temperature
reaches 90 degrees, the rollers will start to turn. Press heat
button again to silence beeping.
At
90 degrees Celsius
, the roller will start turning. If the
lever is in the “UP” position, the rollers are therefore
separated, the machine should not pull any film through.
The chart at the top left hand side of
the machine will give you our
recommended setting for different
thicknesses of film (settings may vary
depending upon material)
