Please turn to next page for safety reminders and other
useful tips on the proper operation of your EZ-Wire34.
2. Adjust depth margin control from 2.5mm to 6.5mm.
This controls how far or how close you want the holes
to be in relation to the edge of the document.
3. Disengage pins that would punch off the edge of
the document by pulling them towards you.
TIP: Punch a few test sheets first in order to get the
proper alignment.
1. Adjust the ruler guide according to the size of your
document.
4. Adjust wire closer control to “punch” (see inset)
then grasp the punch handle with 1 or 2 hands and
pull down to punch holes on the document.
6. Adjust wire closer control to the appropriate size
(see inset “a”). Insert the document into the wire
closer with the wire facing downward (see inset “b”)
then pull the handle down to close. Remove the
bound document and flip over the back cover to
complete the binding process.
TIP: Periodically empty the waste bin to help ensure
uninterrupted use.
5. Position the wire on the wire holder. TIP: Flip the
back cover over to make it face the front (see inset)
then insert into the wire making sure all teeth go
through the holes.
1
2
3
5
4
6
a
b
