4516 112 Ave S.E. Calgary,
Alberta •
Te
l: (403) 279 0020 •
Fax: (403) 279 0747
www.tamashydronic.com
Page 13
Tamas Hydronic Panels
Snow Melt Series
Maintenance
Have your panel checked and serviced by a licensed contractor at least once a year, preferably before the heating season
begins.
Complete the following checklist:
• Check the level of the system antifreeze solution required for the snow melt system
• Check controls of the system to ensure proper and safe operation (see instructions below- HBX Manual page 12)
Maintenance
Testing
SETUP MENU
1) SNOW RATE SETUP
2) DESIGN TEMPS
3) SLAB SETUP
4) SYSTEM SETUP
5) TESTING
6) °C OR °F
°F
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
OFF
OFF
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
OFF
OFF
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
ON
OFF
SETUP MENU
1) SNOW RATE SETUP
2) DESIGN TEMPS
3) SLAB SETUP
4) SYSTEM SETUP
5) TESTING
6) °C OR °F
°F
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
OFF
OFF
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
OFF
OFF
TESTING
1) CONTROL INFO
2) FUNCTION TEST
3) RELAY 1
4) RELAY 2
5) RELAY 3
6) RELAY 4
ON
OFF
OFF
ON
OFF
TeSTIng SeTUP
Control Information
This setting will display processing information about the control.
Function Test
This setting will allow the user to pre-test the control during setup. It will set the outdoor temperature
to 10 °F and the system temperature to 70 °F so the system will test in warmer months.
Relay Test
These settings will test each relay in the control in order to ensure correct operation. The user is able
to test each relay individually. In order to test, select the desired relay by pressing
ENTER
. The relay
can be toggled on and off by pressing the
▼
or
▲
buttons.
Testing Setup
This setting is used to test and view functionality of the control.
