Tamarack Technologies TC1000 Product Manual & Installation Manual Download Page 2

Installation 

Installing the TC1000 in a Wall

You will need the following items:
• Two pieces of 2x stock to match your existing framing
• Saw to cut the hole in the wall
• Hammer or Screw Gun to attach the blocking to the existing frame
• Phillips head Screwdriver to attach the grille
• Weather strip material
• Low expansion Spray Foam sealant 

1. Create a box to hold the unit (Fig. 1).
2. Remove the sheathing that covers the box.
3. Attach TC1000, screwing through the mounting flange.
4. Install exterior finish materials over the mounting flange.
Note: additional flashing may be required above the unit to divert rain.
5. Remove any interior materials covering the box.
6. Install interior finish materials to trim the frame.
7. Attach optional grille to finish installation.

16” OC

Add framing as
shown to create
a box of 12 1/2”
x 27 3/4”. This
box will act to
hold the unit as
well as creating
a plenum for air
movement.
(Figure 1)

Summary of Contents for TC1000

Page 1: ...to cover the opening in the ceiling On a vertical wall We strongly suggest installing a piece of flashing above the TC 1000 to sweep the rain away before it hits the edge of the fan WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWING Use this unit in the manner intended by the manufacturer If you have any questions contact the manufacturer Before servicing ...

Page 2: ... hold the unit Fig 1 2 Remove the sheathing that covers the box 3 Attach TC1000 screwing through the mounting flange 4 Install exterior finish materials over the mounting flange Note additional flashing may be required above the unit to divert rain 5 Remove any interior materials covering the box 6 Install interior finish materials to trim the frame 7 Attach optional grille to finish installation ...

Page 3: ...and the TC regardless of the model Please follow the instructions carefully It is recommended that the wiring of the TC be done by a licensed electrician in accordance with local code requirements Be sure to turn off power before wiring the TC Ventilation Fan Be sure to tighten the strain relief prior to replacing the baseplate Please note that if the TC 1000 is installed in an enclosure with a sp...

Page 4: ...EVENT SHALL TAMARACK TECH NOLOGIES INC BE LIABLE FOR ANY INCIDENTAL DAMAGES OR FOR ANY CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGES IR RESPECTIVE OF THE CAUSE THEREOF OCCURRING EITHER DURING OR AFTER THE WARRANTY PERIOD INCLUDING WITHOUT LIMITATION ANY DAMAGES TO ANY PART OF A BUILDING OR ITS CONTENTS NOTE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGESA...

Reviews: