Patented
ETL Listed
1.
To set the clock: Push the
Power
button. Hold both the
Fan/Light
and
Fan Only
buttons down until the LCD starts flashing (about 5
seconds). The
Fan/Light
button will adjust the time up. The
Fan Only
button will adjust the time down (holding either of these buttons
down will adjust the time more quickly). After the time is set, push
the
Power
button again. this will set the time into memory.
2.
To program the
Time Set (TS):
This determines how many hours
each day the Advantage will operate the fan, either 24 hours or
12 hours. The 12 hour period can be from 6AM to 6PM or from
6PM to 6AM. Push the
Power
button again. Push the button
marked
TS
the display will show the default or current setting. To
change the setting, push the
Fan/Light
or
Fan Only
button to shift
from (“24”, “12”+”AM”, or “12”+”PM”).
3.
To program the
Speed Set (SS):
This determines the speed at
which the fan will operate. 1 is full speed. As you go higher in
number, the fan speed will be lower. Push the button marked
SS
twice. The display will show 1-12. To change the speed, push the
Fan/Light
or
Fan Only
button to set your number.
4.
To program the
Duty Cycle (DC):
This determines how many
minutes of each hour the Advantage will operate the fan. The
time is in 5 minute intervals. Push the button marked
DC
twice.
The display will show 5, 10, 15 minutes etc. To change, push the
Fan/Light
or
Fan Only
button to set the run time.
5.
To program the
Override (OVR):
This determines how long the fan
will run at full speed when either the
Fan/Light
or
Fan Only
button is
pressed. 1 is continuous, 2 is 20 minutes and 3 is 40 minutes run
time. Push the button marked
OVR
twice. The display will show 1,
2 or 3. To change the override, push the
Fan/Light
or
Fan Only
button. The programming is now complete. the display will flash
for 15 seconds, then return to the clock display.
6.
After programming is complete and if you wish to hide the set
buttons, apply the vinyl tape to the face of the Airetrak 1A
Advantage in such a way that the button holes are covered.
• The program will now run the fan at the top of the hour at the
speed and duration you have set.
• To avoid having the Fan or Light time out, restart the timer by
pushing the
Fan/Light
button twice.
• If you just want to leave the fan running for the 20 or 40 minutes
Override when exiting the bathroom, push the
Fan Only
button.
Programming the Airetrak
™
1A Advantage
LIMITED WARRANTY
IF, WITHIN THE PERIOD OF ONE YEAR FROM DATE OF PURCHASE THE AIRETRAK1A ADVANTAGE™ (THE PRODUCT) IS
DEFECTIVE OR MALFUNCTIONS IN NORMAL HOME USE, TAMARACK WILL REPAIR OR REPLACE THE PRODUCT AT ITS DISCRETION WITHOUT
CHARGE FOR LABOR OR MATERIALS. CUSTOMER IS RESPONSIBLE FOR SHIPPING CHARGES.
CONDITIONS, EXCLUSIONS, AND LIMITATIONS
-THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS, EXCLUSIONS AND
LIMITATIONS. THIS WARRANTY DOES NOT COVER PROBLEMS RESULTING FROM INSTALLATION, OPERATION OR MAINTENANCE THAT HAS
BEEN UNDERTAKEN OTHER THAN IN ACCORDANCE WITH THE INSTRUCTIONS. THIS WARRANTY DOES NOT COVER PROBLEMS RESULTING
FROM DEFECTS IN OR CAUSED BY ASSOCIATED EQUIPMENT (FURNACES, SOLARIA, ETC.) ; FROM REPAIRS OR MODIFICATIONS ATTEMPTED
BY PERSONS OTHER THAN TAMARACK.; FROM ABUSE, ACCIDENTAL OR SHIPPING DAMAGE, ACTS OF GOD. THIS WARRANTY DOES NOT
APPLY TO THE PRODUCT USED OUTSIDE THE UNITED STATES, ITS TERRITORIAL POSSESSIONS AND CANADA. EXCEPT AS SET FORTH ABOVE,
NO EXPRESS OR IMPLIED WARRANTY IS GIVEN OR AUTHORIZED BY TAMARACK. AND ALL OTHER SUCH WARRANTIES ARE EXPRESSLY DIS-
CLAIMED. ANY WARRANTY OR MERCHANTABILITY OF FITNESS FOR ANY PARTICULAR PURPOSE SHALL BE LIMITED TO THE WARRANTY HERE-
UNDER. MOREOVER, ANY LIABILITY OF TAMARACK FOR THE PRODUCT SHALL BE LIMITED TO THE REPLACEMENT OF THE PRODUCT. IN NO
EVENT SHALL TAMARACK BE LIABLE FOR ANY INCIDENTAL DAMAGES OR FOR ANY CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGES,
IRRESPECTIVE OF THE CAUSE THEREOF, OCCURRING EITHER DURING OR AFTER THE WARRANTY PERIOD. INCLUDING WITHOUT LIMITATION
ANY DAMAGE TO ANY PART OF A BUILDING OR ITS CONTENTS. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCI-
DENTAL OR CONSEQUENTIAL DAMAGES AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
PROOF OF PURCHASE REQUIRED.
Intended for installation in either a metal outlet box or a plastic outlet box.
AA-9
Note: For Fans without a Light, cap the BLACK wire at the
Airetrak1A Advantage. Not for use with (AFCI) arc fault circuits.
The Airetrak
™
1A Advantage after a Power Loss
When power is restored to the Airetrak Advantage after a power loss and left
untouched the clock auto resets to 12AM and will flash for 10 -15 seconds
before going dark. The Advantage must be turned back on by pushing the
POWER button. The program will NOT be lost. The Time Set, Speed Set,
Duty Cycle and Override settings remain as they were programmed. If the power
loss is approximately 45 seconds or less the clock may not need to be reset.
Please keep this in mind that if the clock is never re-set to the correct time the
only thing that will be noticeable after turning the POWER back on is the clocks
readout is wrong. The Airetrak Advantage works the same way as it was pro-
grammed for. It will run at the top of every hour using the same program that the
installer has set it for.
Fan/Light
button adjusts
time up
OVR:
Override Button - Determines how
long fan will run at full speed when
either Fan/Light or Fan Only is pressed.
DC:
Duty Cycle Button - Determines
how many minutes of each hour
the Advantage will operate the fan.
Set in 5 minute intervals.
SS:
Speed Set - Determines the
speed at which the fan operates.
TS:
Time Set - Determines
how many hours each day
the Advantage will operate
the fan, either 12 or 24 hours.
Fan Only
button adjusts
time down
Power
LIKE US ON
FOLLOW US
ON TWITTER
20 Patterson Brook Rd, Suite 7
West Wareham, MA 02576
774-678-4433 / 800-222-5932 / Fax 774-678-4436
