Installation Manual
SP-KNBR-001
| (800) 819-7236
3
4
2019 v1.0
Step 1. Attaching Swivel Bracket to Panel Support
A.
Using a 1/4-20 x 3/4” bolt and flat washer, attach the bracket to the inside end of the panel support in the hole as
shown.
B.
Repeat on the opposite panel support
, leave brackets “finger tight
” for final adjustment of the knee brace assembly.
(Depends on panels size/width)
Step 2. Attaching Lower Knee Brace Bucket
A.
Thread the banding through the set of narrow slots in the l o w e r bucket.
B.
Place on the pole such that the knee braces will be level with the tips of the panel supports as shown below,
leave
loose enough to move for final adjustments.
