Talon FB4052 User Manual Download Page 3

4

SAFETY WARNINGS & INSTRUCTIONS

AU

AU

5

Unplug when not in use, before making adjustments, changing parts, cleaning, or
working on the log splitter; Consult technical manual before servicing.

•   DISCONNECT POWER

Take used oil to an authorized collection point or follow the stipulations in the coun-
try where the log splitter is used. 
Do not discharge into drains, soil or water.

•   PROTECT THE ENVIRONMENT

•   MAINTAIN YOUR LOG SPLITTER WITH CARE

Keep the log splitter clean for best and safest performance.

•   MAKE THE WORKSHOP CHILDPROOF

Lock the shop. Disconnect master switches. Store the log splitter away from children and others
not qualified to use it.

TABLE OF CONTENTS 

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Trouble Shooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety Warnings & Cautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Application Conditions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Set up and Preparation for Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Wiring Diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Plumbing Diagram   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Log Splitter Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Freeing a Jammed Log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Replacing Hydraulic Oil  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sharpening Wedge   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Parts Schematic    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

•   AVOID ELECTRICAL SHOCK

Check that the electric circuit is adequately protected and that it corresponds with the power, volt-
age and frequency of the motor. Check that there is a ground connection, and a regulation differ-
ential switch upstream.
Ground the log splitter. Prevent body contact with grounded surfaces: pipes, radiators, ranges, and
refrigerator enclosures.
Never open the pushbutton box on the motor. Should this be necessary, contact a qualified electri-
cian.
Mark sure your fingers do not touch the plug's metal prongs when plugging or unplugging the log
splitter.

The log splitter must be always operated by one person only. Other people
should keep a safe distance from the work area, especially when the log splitter
is under operations. Never use other people to help you with freeing jammed log. 

•   KEEP VISITORS AND CHILDREN AWAY

•   INSPECT YOUR LOG

Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut
square. Branches must be cut of flush with the trunk.

•   DON'T OVERREACH

Floor must not be slippery.
Keep proper footing and balance at all times.
Never stand on log splitter. Serious injury could occur if the tool is tipped or if the cutting tools is
unintentionally contacted. Do not store anything above or near the log splitter where anyone might
stand on the tool to reach them.

Always pay full attention to the movement of the log pusher. 
Do not attempt to load the log on until the log pusher has stopped.
Keep hands out of the way of all moving parts.

•   AVOID INJURY FROM UNEXPECTED ACCIDENT

Keep you hands away from splits and cracks which open in the log; They may close
suddenly and crush or amputate your hands.
Do not remove jammed logs with you hands. 

•   PROTECT YOUR HANDS

•   DON'T FORCE TOOL  

It will do a better and safer job at its design rate. Never try to split logs larger than those indicated
in the specifications table. This could be dangerous and may damage the machine.
Don't use log splitter for a purpose for which it was not intended.

•   NEVER LEAVE TOOL RUNNING UNATTENDED    

Don't leave tool until it has come to a complete stop.

If supply cord is damaged return to supplier for repair.

Summary of Contents for FB4052








Reviews: