•
CLEANING
1.
Regular cleaning and maintenance of your line trim-
mer will ensure efficiency and prolong the life of your
machine.
2.
After each cutting operation, take apart and clean out
the grass and soil from: the spool and its slot, the
whole trimmer and in particular the guard.
3.
During operation, keep the air slots clean and free of
grass.
4.
Only use a cloth soaked with hot water and a soft
brush to clean the line trimmer.
5.
Do not spray or wet the appliance with water.
6.
Do not use detergents or solvents as these could ruin
the trimmer. The parts in plastic can easily be dam-
aged by chemical agents.
SERVICING DOUBLE-INSULATED APPLIANCE
In this double-insulated appliance, two systems of insula-
tion are provided instead of grounding. No grounding
means is provided on a double-insulated appliance, nor
should a means for grounding be added to the appliance.
There are no owner serviceable parts inside. A double-
insulated appliance is marked with the words, “DOUBLE
INSULATION” or “DOUBLE INSULATED”. The symbol
(square within a square) may also be marked on the appli-
ance.
Any service must only be carried out by a qualified tech-
nician at an authorized service centre.
1.
Place switch in “OFF” position and unplug the power
supply before the appliance is serviced, cleaned or
maintenance is performed.
2.
Keep air intake clean and air vents free of debris to
avoid overheating the motor.
3.
Clean with a damp sponge and mild soap. Do not
squirt with water, hose with water or other liquids.
4.
No lubrication is necessary as the motor is equipped
with lifetime lubricated bearings.
5.
If the trimmer does not operate, turn switch to “OFF”
position and disconnect extension from power sup-
ply first, then from trimmer. Check power supply for
blown fuses or tripped circuit breakers. Do not
attempt to repair it yourself. There are no serviceable
parts inside.
GB
6
