background image

TROUBLE SHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTIVE ACTION

Engine does 

Throttle not in CHOKE position.

Move throttle to CHOKE

not start.

Fuel tank is empty.

Fill tank with fuel.

Air cleaner element is dirty.

Clean air cleaner element.

Spark-plug loose.

Tighten spark-plug to 25-30 N•m.

Spark-plug leads loose or

Install spark-plug lead on spark plug.

disconnected from plug.
Spark-plug gap is incorrect.

Set gap between electrodes at 
0.6 to 0.7mm.

Spark-plug is defective.

Install new, correctly gapped plug.

Carburetor is flooded with fuel.

Remove spark plug lead and remove 
plug. Switch fuel tap off. Pull starter 
rope 6 times to clear cylinder of fuel. 
Clean and dry spark plug,then reinstall.  

Faulty ignition module.

Contact the service agent.

Engine difficult to  

Dirt, water or stale fuel tank.

Drain fuel and clean tank. Fill 

start or loses power.

tank with clean, fresh fuel.

Vent hole in fuel tank cap is plugged. 

Clean or replace fuel tank cap.

Air cleaner element is dirty.

Clean air cleaner element.

Engine operates 

Spark-plug is defective.

Install new, correctly gapped plug.

erratically.

Spark-plug gap is incorrect.

Set gap between electrodes at 
0.6 to 0.7mm.

Air cleaner element is dirty.

Clean air cleaner element.

Engine idles poorly.

Air cleaner element is dirty. 

Clean air cleaner element.

Air slots in engine shroud are blocked.  Remove debris from shots.
Cooling fins and air passages 

Remove debris from cooling fins

under engine fan housing 

and air passages.

are blocked.

Engine skips at 

Gap between electrodes or 

Set gap between electrodes at high

speed.

spark-plug is too close.

0.7 to 0.8mm

Engine overheats.

Cooling air flow is restricted.

Remove any debris from slots in
shroud, blower housing, air passages
and cooling fins on engine.

Incorrect spark-plug.

Install correct spark plug. 
(Part No. AO9295-305001)

Mower vibrates 

Cutting assembly is loose.

Check and tighten blade and cutting

abnormally.

plate bolts.

Cutting assembly is unbalanced.

Check blade and cutting plate for 
damaged wear. Replace all damaged 
or worn components.

2

The safety of user and others involved. Personal injury may result if information
is disregarded.

WARNING

Follow instructions to avoid mower damage and possible 
loss of warranty.

CAUTION

Congratulations on your purchase of a quality Talon product.
This manual covers the operation and maintenance of the Talon walk behind
mowers. Please read and understand this manual before using your new mower. If
assistance is required, please contact Talon Tools Australia or any Talon Tools
mower servicing dealer.
To emphasise special information the WARNING and CAUTION icons are used,
please observe these carefully.

CONTENTS

Specifications

____________________________________________________

Pg 4

General Identification

_____________________________________________

Pg 4

Safety Instructions

________________________________________________

Pg 5

Assembling Instructions 

___________________________________________

Pg 7

Preparing the engine

______________________________________________

Pg 8

Running the engine

_______________________________________________

Pg 10

Starting the engine

________________________________________________

Pg 11

Drive clutch lever ________________________________________________ Pg 12
Cut height control

________________________________________________

Pg 14

Blade maintenance

________________________________________________

Pg 15

Maintenance schedule

_____________________________________________

Pg 16

Spark plug

_______________________________________________________

Pg 17

Engine air cleaner

_________________________________________________

Pg 18

Mowing tips

_____________________________________________________

Pg 19

3

TROUBLESHOOTING INFORMATION

AU

CONTENTS

AU

Meaning of symbols marked on the product

Read the user manual before using the machine

Whenever the machine is in use, safety goggles

must be worn to safeguard against flying objects,

as must ear protectors, such as a soundproof

helmet, in order to protect the operator’s hearing.

Wear safety boots to protect your feet.

Do not reach underneath the mower.

Keep feet away from underneath mower.

Wear gloves to protect your hands.

Do not cut on steep slopes.

Keep people or animals away from the

machine during operation.

Danger : Objects thrown up by machine.

Summary of Contents for AM3051SP











Reviews: