1.
Fit wire handle (1) on to the studs on the top of the
wire loop sides (2) & (3).
2.
Tighten the nuts to fix in wire handle (1).
3.
Fit rods A to the studs at the front of wire loop sides
(2) & (3).
4.
Tighten the nuts to fix the rods.
1.
Attach the rods (A) to the slotted brackets on either
side of the mower.
2.
Clip wire loops (B) & (C) onto the roller rod.
ATTACHING CATCHER TO MOWER
B
C
A
CATCHER ASSEMBLY INSTRUCTIONS
A
4
3
C
B
2
1
4
